https://www.loom.com/share/c930fcfbb6f44700abe7e993b58078fd?sid=7be9f5a6-4a12-45aa-b302-f0de05a78f82
Put the battery in the reader. You’ll have to pop off the back to get this to work.
Turn the reader on. Hold the power button on the right hand side of the reader.
Connect it to Wi-Fi. You’ll have to enter your Wi-Fi password.
<aside> 🔌 If you prefer to have this card reader connected to via an Ethernet cable please request a hub. (This hub also has USB ports that can supply power to other devices, it’s not intended to integrate with the card reader.)
</aside>
Update the reader!! The reader almost always asks to be updated to the latest software. Say yes! This may take 20-30 minutes.
Message the pairing code to support. Once the card reader is up-to-date, it will have a pairing code like “smartly-wire-mobile”. Message [email protected] or use the blue chat icon within Rundoo to share the message to support
We input that on our end to associate the reader with your store.
<aside> âś… Stripe recently launched an update that lets us remotely configure, so you may be able to bypass this step.
</aside>
Plug BOTH the reader and the dock in. You should have two wires: one for the dock and one for the reader.
Confirm it works. Go to Sales, scroll down, and select a card reader. Now add a product—does it show up on the reader?
https://www.loom.com/share/49ed19fd36ce479e8262f9d1761c33a7?sid=8c3c3d44-d59f-499e-ae29-f933f2b10f4e
Recommended Stylus. If you’d like to capture signatures. This stylus was the one we got the best response with out of all the ones tested. https://www.amazon.com/dp/B0CBPNS485/ref=pe_386300_442618370_TE_dp_i1
