🖨️ Star Micronics TSP100IV Setup Guide

For models with WLAN + USB-C + Ethernet (LAN) + CloudPRNT. Manual images pulled from this page.

📦 What You’ll Need

• TSP100IV printer
• Power cable and outlet
• Ethernet cable or USB-C/A (for wired setup)
• Wi-Fi network credentials (for wireless setup)
• Download the configuration app
  • iOS: https://apps.apple.com/gb/app/star-quick-setup-utility/id1549088652
  • Android: https://play.google.com/store/apps/details?id=com.starmicronics.starquicksetuputility&hl=en_US&gl=US
• Roll of 80 mm thermal receipt paper

🧾 Section 1 — Physical Setup

🪛 Step 1: Unbox & Place

• Place the printer on a flat surface near a power outlet and network access.
• Ensure adequate ventilation and accessibility.

🧻 Step 2: Load Paper

https://lh7-us.googleusercontent.com/elCnR_aiTjyHmt2ZMuImD4Rfj8vUNJ7UVJC7aplVO8m2XRiLVBDqdaVezpnmnrNKY0IS2RBG4C971XBj_uDCCcF5UzN6Ev9VWbfG32F-0ClIU8PrGgPKdyUasvju5woscPqp_aff7r2GEjQuvz6holM

https://manuals.plus/wp-content/uploads/2022/08/star-TSP100IV-Thermal-Printer-fIG-10.gif

5