Setting up a Stripe card reader is a hardware bring-up the customer does on-site after the reader arrives — unbox, boot, get on Wi-Fi, and send Rundoo a pairing code so we can wire it to your Stripe account. Rundoo orders and ships the reader as part of your standard terminal package.

This page walks the Stripe Reader S710 — the current model — plus the older BBPOS WisePOS (the prior generation) for stores running existing hardware.

For card-reader issues after pairing (reader offline, charge stuck, declined transactions), see Card reader troubleshooting.

Stripe Reader S710 (current model)

The S710 is Rundoo's current Stripe-made reader — Wi-Fi connected, white, with a touchscreen.

Step 1: Unbox

Three boxes ship for a single station:

• Dock — the cradle the reader sits on.
• Reader — the actual card-reading device.
• Power cord — plugs into the dock.

Step 2: Connect everything

1. Plug the power cord into a wall outlet.
2. Plug the cord into the dock.
3. Set the reader on the dock.

Step 3: Power on the reader

Hold the power button on the right-hand side of the reader.

Step 4: Pick country and language

The reader prompts you on first boot. Pick your country and language.

<aside> 🔐

Admin password — if the reader asks for one at any point, the default is 07139.

</aside>